Railduino 2.0 - LAN
5619.01 VAT excl.
Input / Output module based on Arduino platform
24x digital inputs, 12x relay outputs, 8x digital outputs, 2x analog inputs, 2x analog outputs, 1-wire, RS485, Ethernet ...
Railduino module is a device working in connection with superior control system (e.g. Loxone) as so called distributed inputs / outputs. With this connection the control system is able to control external devices (e.g. lights, pumps etc.) using outputs or sense the values at the inputs of the module (e.g. buttons, contacts etc.).
Module is equipped with both digital and analog inputs. There are also relay, digital and analog outputs - see the table below. Module can handle 1-wire devices (Maxim/Dallas) as favourite temperature sensors DS18B20 or DS2438 (Unica 1wire sens. module).
Inputs/outputs can be read/controlled by communication bus RS485 or by LAN within computer network. Both types of connections communicate using UDP protocol (User defined protocol). There can be connected up to 15 Railduino modules within the same network/bus.
Features and functions:
- 24x digital inputs - optically separated, max. input voltage 24V DC
B – RS485 bus connection
UDP communication settings in Loxone Config
LAN settings of communication for sensing inputs in Loxone Config:
LAN settings of communication for control of outputs in Loxone Config - address: "/dev/udp/255.255.255.255/44444"
RS485 settings of communication in Loxone Config:
MODBUS TCP communication settings in Loxone Config
Modbus mapa a adresování proměnných
Settings of Modbus TCP - insert Modbus server and set IP and port in Loxone Config:
Settings of Modbus TCP - set the address of the Modbus client - Railduino module
2. "How long it will take from pushing the wall switch to actually switching on the lights?"
3. "Is it possible to connect more then one Railduino to the same bus?"