Railduino LED - LAN
CZK 3,999
3304.96 VAT excl.
Input / Output module based on Arduino platform for complete control of 1wire sensor modules U1WTVSL including measurement over 1wire bus and RGB LED control. Also includes analog outputs for LED driver control
16x RGB LED outputs, 12x analog outputs, 1-wire, RS485, Ethernet ...
 |
 |
 |
 |
 |
 |
 |
 |
Railduino module is a device working in connection with superior control system (e.g. Loxone) as so called distributed inputs / outputs. With this connection the control system is able to control external devices (e.g. lights, pumps etc.) using outputs or sense the values at the inputs of the module (e.g. buttons, contacts etc.).
Railduino LED module is the option which is intended to be used in connection with Unica 1wire sensor modules (U1WTVSL) including control of backlighting RGB diodes. There is 16 outputs where 1 ouput is connected to 1 sensor module U1WTVSL. Also it provides 12 analog outputs for control of LED power supplies with the singal 0-10V.
Inputs/outputs can be read/controlled with use of communication bus RS485 or LAN within computer network. Both types of connections communicate using UDP protocol (User defined protocol) or Modbus TCP/RTU. There can be connection of up to 15 Railduino modules within the same network/bus.
Features and functions:
|
- 16x RGB LED outputs - for controll of RGB LED diodes, to be used with modules U1WTVSL |
Module settings - address and functions
 |
 |
Communication settings
| COMMUNICATION | DESCRIPTION | VALUE |
| RS485 | COMMUNICATION SPEED | 115200 BD |
| DATA BITS | 8 | |
| STOPBITS | 1 | |
| PARITY | NONE | |
| LAN | UDP INCOMING PORT | 55555 |
| UDP OUTGOING PORT | 44444 | |
| MODBUS PORT | 502 | |
| IP ADDRESS DYNAMIC | IF DHCP SERVER IN LAN | |
| IP ADDRESS STATIC | 192.168.150.15x - IF NO DHCP SERVER IN LAN (x is MODULE ADDRESS) |
Status LED diodes
| LED DIODE | STATE | DESCRIPTION | REMEDY |
| BLUE | NOT LIT | MODULE BOOTING | WAIT FOR 1 MINUTE |
| MODULE AWAITING LAN CONNECTION | CHECK THE LAN CONNECTION | ||
| NO POWER SUPPLY | CHECK THE POWER SUPPLY | ||
| LIT | MODULE WITH STATIC IP | CHECK DHCP SERVER | |
| BLINKS 1HZ | MODULE OPERATING | - | |
| GREEN | NOT LIT | NO COMMUNICATION VIA LAN / RS485 | - |
| LIT | COMMUNICATING VIA LAN / RS485 | - |
1. UDP protocol - Controlling the RGB backlighting LED
 |
2. UDP protocol - 1-wire bus
 |
3. UDP protocol - Analog outputs
 |
Reviews
Input / Output module based on Arduino platform for complete control of 1wire sensor modules U1WTVSL including measurement over 1wire bus and RGB LED control. Also includes analog outputs for LED driver control
16x RGB LED outputs, 12x analog outputs, 1-wire, RS485, Ethernet ...
|
|
|
|
|
|
|
|