Railduino LED - LAN

CZK 3,999
VAT incl.

3304.96 VAT excl.

Input / Output module based on Arduino platform for complete control of 1wire sensor modules U1WTVSL including measurement over 1wire bus and RGB LED control. Also includes analog outputs for LED driver control

16x RGB LED outputs, 12x analog outputs, 1-wire, RS485, Ethernet ...

16RGB 12AO wire.png 485.png LAN.png dip.png din.png LED.png

Quantity
    On stock - 21 pieces

Railduino module is a device working in connection with superior control system (e.g. Loxone) as so called distributed inputs / outputs. With this connection the control system is able to control external devices (e.g. lights, pumps etc.) using outputs or sense the values at the inputs of the module (e.g. buttons, contacts etc.). 

Railduino LED module is the option which is intended to be used in connection with Unica 1wire sensor modules (U1WTVSL) including control of backlighting RGB diodes. There is 16 outputs where 1 ouput is connected to 1 sensor module U1WTVSL. Also it provides 12 analog outputs for control of LED power supplies with the singal 0-10V.


Inputs/outputs can be read/controlled with use of communication bus RS485 or LAN within computer network. Both types of connections communicate using UDP protocol (User defined protocol) or Modbus TCP/RTU. There can be connection of up to 15 Railduino modules within the same network/bus.

Features and functions:

16x RGB LED outputs - for controll of RGB LED diodes, to be used with modules U1WTVSL
12x analog outputs - output voltage 0 - 10V 
1-wire bus - 2 channles, max. 10 pcs of sensors / channel - DS18B20, DS2438 (Unica 1wire sensor. modules)
RS485 bus - serial communication with superior control systems
USB - for reprogramming of the Arduino module
LAN - communication with computer network (only the module with this option!)
- status LEDs - indication and status of the module
DIP switch - module address settings, other function










railduino_led_decomp_1.jpg

Module settings - address and functions



Communication settings

 COMMUNICATION  DESCRIPTION  VALUE
 RS485  COMMUNICATION SPEED  115200 BD
 DATA BITS  8
 STOPBITS  1
 PARITY  NONE
 LAN  UDP INCOMING PORT  55555
 UDP OUTGOING PORT  44444
 MODBUS PORT  502
 IP ADDRESS DYNAMIC  IF DHCP SERVER IN LAN
 IP ADDRESS STATIC  192.168.150.15x - IF NO DHCP SERVER IN LAN (x is MODULE ADDRESS)


Status LED diodes

 LED DIODE  STATE  DESCRIPTION REMEDY
 BLUE  NOT LIT  MODULE BOOTING WAIT FOR 1 MINUTE
   MODULE AWAITING LAN CONNECTION CHECK THE LAN CONNECTION
 NO POWER SUPPLY CHECK THE POWER SUPPLY
 LIT  MODULE WITH STATIC IP CHECK DHCP SERVER
 BLINKS 1HZ  MODULE OPERATING -
 GREEN  NOT LIT  NO COMMUNICATION VIA LAN / RS485 -
 LIT  COMMUNICATING VIA LAN / RS485 -




1. UDP protocol - Controlling the RGB backlighting LED



2. UDP protocol - 1-wire bus



3. UDP protocol - Analog outputs







Railduino 2.1 manual - operating instructions EN ver. 10/14/2019 DOWNLOAD
Railduino 2.0 manual - operating instructions EN ver. 09/18/2019 DOWNLOAD
Railduino LED manual - operating instructions EN ver. 11/03/2020 DOWNLOAD
Template for Loxone Config CZ/EN ver. 09/18/2019 DOWNLOAD
Compiled firmware for Railduinomodules last ver. 08/11/2020 DOWNLOAD
Uncompiled firmware for Railduino 2.0 GITHUB 02/04/2019 DOWNLOAD
CE Declaration of conformity CZ/EN ver. 1/1/2018 DOWNLOAD



Reviews